Development and Prototyping X2-Series Expansion Board
Prototyping board for Strato Pi Max to design and test custom circuits. It exposes all standard X2‑Series bus lines via a two‑sided grid of solderable thru‑holes and has room for a pluggable terminal block. Onboard 3.3 V regulator, DS28E05 EEPROM and front‑facing LED.
€29.00 + tax
Need volume pricing or custom variations?
Description
The X2-Series X2BDEV10XZ board is a development and prototyping circuit board that exposes all standard X2-Series expansion bus lines making it easy to design and test custom circuits.
The proto area is a two sided grid of standard 100 mil (0.1″) spaced thru-holes for soldering. The board also has holes on one side for an X2-Series standard 3.81 mm (0.15″) 8 lines pluggable terminal block. A front facing LED can be wired to be turned on when the board is powered, or driven by custom circuits. An on-board 3.3 V regulator is also available and can be wired to the main 5 V board power rail if needed.
Features
- Mechanical and electrical interconnection reference design for the X2-Series Standard
- Break out of all X2 board-to-board connector lines
- 3.3 V 300 mA LDO voltage regulator
- DS28E05 1-Wire EEPROM for X2-Series board identity
- Blue LED
Specifications
| INTERNAL LDO VOLTAGE REGULATOR | |
| Output voltage | 3.3 V |
| Output voltage accuracy | +/- 3% |
| Output current | 300 mA |
| ENVIRONMENTAL | |
| Operating temperature | -20…+60 °C |
| Storage temperature | -30…+80 °C |
| Altitude | Up to 2000 m |
| Humidity | 5% to 95% RH noncondensing |
| MECHANICAL | |
| 3.81 mm pitch terminal block characteristics | Maximum conductor cross section: 1.3 mm2 (16AWG), or 0.5 mm2 when using ferrules (highly recommended) Recommended stripping length: 6 mm Screw thread: M2 Maximum screws tightening torque: 0.3 Nm |
| Dimensions | width: 84.3 mm height: 41.1 mm depth: 8.0 mm |
| Weight | 15 g (including screws) |