Exo Sense Pi
Exo Sense Pi is a multi-sensor module with a Raspberry Pi 4 computing core and a wide range of connectivity options. Ready for residential and commercial applications such as environmental monitoring and data gathering, BLE positioning, indoor people and assets tracking, rooms management and access control, voice control and much more.
€266.00 – €295.00 + tax
Need volume pricing or custom variations?
Description
An environmental sensor and a powerful server
Exo Sense Pi is a multi-sensor module with a Raspberry Pi 4 computing core and a wide range of connectivity options. Ready for residential and commercial applications such as environmental monitoring and data gathering, BLE positioning, indoor people and assets tracking, rooms management and access control, voice control and much more.
Its broad range of sensors, two digital inputs and open-collector output are routed to a Raspberry Pi Compute Module 4, all in a small wall-mount package.
The Raspberry Pi Compute Module 4 incorporates a high performance quad-core ARM Cortex-A72 processor, Wi-Fi, Bluetooth 5.0 and Bluetooth Low Energy (BLE) wireless interfaces, up to 8GB RAM and 32GB eMMC Flash memory.
Moreover, an RS-485 bus and dedicated I/O lines enable Exo Sense Pi to communicate over standard protocols such as Modbus, I2C, 1-Wire and Wiegand.
Exo Sense Pi is compliant with the CE electromagnetic compatibility standard for emissions in residential environments and immunity in industrial environments. It is also compliant with the FCC and IC electromagnetic compatibility standards.
Features
Sensors:
- temperature
- humidity
- air quality (VOC)
- light intensity
- microphone for sound intensity monitoring, recording and processing
- PIR motion sensor
Mounting:
- 80x80mm wall mount ABS case with fast snap-in terminal block
Power supply:
- 9÷28Vdc power supply, with surge and reverse polarity protection, and 1.1A resettable fuse
Raspberry Pi Compute Module compatibility:
- all Raspberry Pi Compute Module 4 boards. A microSD slot is present on Exo Sense Pi to use external flash memory cards with the CM4 Lite
Inputs/Outputs:
- 2 x digital inputs or TTL level I/O (1-Wire, I2C, Wiegand support)
- 1 x open collector output
Connectivity:
- standard RS-485 interface to the Raspberry Pi serial line, with electrostatic discharge protection
- 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac wireless; Bluetooth 5.0, BLE depending on installed Raspberry Pi Compute Module 4 board
- micro USB socket for updating Compute Module 4 eMMC
More:
- GPIO-controlled LED
- piezoelectric buzzer, for acoustic feedback
- real time clock (RTC) with replaceable back-up battery
- embedded Microchip ATECC608A secure element chip
- internal temperature sensors for heat compensation
Optionals (factory-installed upon request):
- earthquake sensor module
Specifications
| Power supply | 10-28 V⎓ (VDC)
Reverse polarity protection with 1.1 A resettable fuse. Surge protection up to ±1000V/2ohms 1.2/50μs |
| Current consumption at VS+ 12 V⎓
including Raspberry Pi CM4, with active Wi-Fi, no other connections |
low CPU load: 140 mA
100% CPU load, before throttling: 380 mA Actual current consumption may vary based on working conditions |
| Current consumption at VS+ 24 V⎓
including Raspberry Pi CM4, with active Wi-Fi, no other connections |
low CPU load: 95 mA
100% CPU load, before throttling: 210 mA Actual current consumption may vary based on working conditions |
| Raspberry platform compatibility | Compute Module 4, all versions
(tested with CM4102000 for regulatory compliance) |
| Voltage range at digital inputs DIx | 0…40V⎓ |
| Current for each digital input DIx (typ.) | 1.8mA at VS+ 12V⎓
3.5mA at VS+ 24V⎓ |
| Voltage threshold digital inputs Dix (typ.) | VIH: 4.6 V
VIL: 3.6 V |
| Voltage range at TTL I/O TTLx | 0…5 V⎓ |
| Impedance for TTL I/O TTLx | 220 Ω |
| Voltage threshold TTL I/O TTLx (typ.) | VIH: 1.3 V
VIL: 1.1 V |
| Maximum recommended cable length for digital input DIx | 30 meters |
| Maximum recommended cable length for TTL I/O TTLx | 5 meters |
| Open collector OC1 rating | NPN type, common on VS+, short circuit protected 100 mA MAX output current |
| Maximum recommended cable length for open collector output OC1 | 2 m |
| Communication ports | RS-485 half-duplex with data flow direction controlled by GPIO6 (active low), or passive mode |
| Baud Rates on RS-485 port | 1200 to 115200 (higher speeds are possible, but not guaranteed to meet EMI requirements) |
| ESD-Protection Voltage on RS-485 A/B | ±15kV human body model
±8kV contact discharge |
| Surge protection on RS-485 A/B | Surge protection up to ±500V/2ohms 1.2/50μs; 600W peak pulse power capability at 10/1000μs waveform |
| Fail safe feature on RS-485 | Optional with jumpers (not installed) |
| Real time clock | Internal RTCC circuit with backup lithium battery. Only use CR1025 Lithium / Manganese Dioxide (Li/MnO2) batteries.
Expected battery life without main power supply: ~2 years |
| 7-pin terminal block characteristics | Maximum conductor cross section: 2.5 mm2 (14 AWG) Recommended stripping length: 7 mm Screw thread: M3Maximum screws tightening torque: 0.6 Nm |
| Electromagnetic immunity compliance | EN 61000-4-2 (ESD)
EN 61000-4-3 (Radiated RF Field) EN 61000-4-4 (Burst/fast transient) EN 61000-4-6 (Conducted) EN 61000-4-8 (Power frequency magnetic field) |
| Housing | Wall mount 80x80mm ABS case |
| Operating temperature | -10…+50 °C |
| Storage temperature | -20…+70 °C |
| Relative humidity | 5% to 90% noncondensing |
| Protection degree | IP20 |
| Weight | 90 g (Exo Sense Pi with CM4) |