Industrial Analog Outputs X2-Series Expansion Board
Strato Pi Max expansion board providing four individually configurable outputs set as either 0–10 V voltage or 0–20 mA current drivers. Protected 5 V auxiliary power output and two digital I/O lines for 1-Wire, Wiegand, or I2C devices.
€115.00 + tax
Need volume pricing or custom variations?
Description
The X2-Series X2BI10XAOZ Industrial Analog Outputs expansion board is designed for the Strato Pi Max.
It provides four analog outputs, individually configurable as 0-10 V voltage or 0-20 mA current drivers.
Additionally the board features a 5 V auxiliary power output and two 5 V-level I/O lines compatible with digital-protocol devices such as 1-Wire, Wiegand, or I²C devices.
Features
- Four 0-10V or 0-20mA analog outputs, individually configurable
- Two digital 5V-level I/O lines, compatible with 1-Wire, Wiegand, I²C
- 5 Vdc auxiliary voltage output, with over-current and reverse current protection
- Front panel LED showing board power status
Specifications
| AOx: ANALOG VOLTAGE OUTPUTS | |
| Output range | 0…+10 V |
| Output drive current | 15 mA (Max) |
| Total error | ±0.5 % of full-scale (Max) |
| Resolution | 14 bits |
| AOx: ANALOG CURRENT OUTPUTS | |
| Output range | 0…+20 mA |
| Output drive voltage | 12 V (Max) |
| Total error | ±0.5 % of full-scale (Max) |
| Resolution | 14 bits |
| DTx: DIGITAL INPUT/OUTPUT | |
| Output voltage | VOL: 0.2 V VOH: 5.0 V |
| Input voltage threshold | VIH: 2.4 V VIL: 0.8 V |
| Pull-up (+5 V) | 10 kOhm |
| AUX POWER OUTPUT | |
| 5VOUT output voltage | 5 V |
| 5VOUT output current | 500 mA (Max) |
| EMI IMMUNITY STANDARDS | |
| Electromagnetic immunity compliance | EN 61000-4-2 (ESD) EN 61000-4-3 (Radiated RF Field) EN 61000-4-4 (Burst/fast transient) EN 61000-4-5 (Surge) EN 61000-4-6 (Conducted) EN 61000-4-8 (Power frequency magnetic field) |
| ENVIRONMENTAL | |
| Operating temperature | -20…+60 °C |
| Storage temperature | -30…+80 °C |
| Altitude | Up to 2000 m |
| Humidity | 5% to 95% RH noncondensing |
| Protection degree | IP20 |
| Vibration IEC 60068-2-6 (Test Fc, Operating) | 0.7 g @ 5…100 Hz |
| MECHANICAL | |
| 3.81 mm pitch terminal block characteristics | Maximum conductor cross section: 1.3 mm2 (16AWG), or 0.5 mm2 when using ferrules (highly recommended) Recommended stripping length: 6 mm Screw thread: M2 Maximum screws tightening torque: 0.3 Nm |
| Dimensions | width: 84.3 mm height: 41.1 mm depth: 10.7 mm |
| Weight | 27 g (including terminal block and screws) |