Need help? Contact us!

Worldwide shipping



Worldwide shipping



Strato Pi Base – Mensit

Industrial Raspberry Pi server, CE/FCC/IC compliant, with wide-range power supply, RTC, RS-232 and RS-485 interfaces, watchdog and secure element.

Strato Pi Base board 3.0, Raspberry Pi 4B 2GB, transparent panel, custom packaging.

177.48 + tax

SKU: N/A Category:

Need volume pricing or custom variations?


An industrial Raspberry Pi

Strato Pi Base enhances the Raspberry Pi computer with several hardware features to make it suitable for use in industrial and professional applications where reliability and service continuity are key requirements.

It is compliant with the low voltage and EMC CE directives, as well as the harmonised standards for electromagnetic compatibility, electrical safety, emission and the RoHS directive for hazardous substances. It is also compliant with the applicable FCC rules and IC standards.



  • 4 modules DIN rail case
  • power supply and serial connections on screw terminal block

Power supply:

  • 9-28Vdc power supply, with surge and reverse polarity protection, and 2.2A resettable fuse
  • up to 4.0A max current to the 5V Raspberry Pi power supply input pins (at 24Vdc)

Serial interfaces:

  • standard RS-232 and RS-485 interfaces to the Raspberry Pi serial line, with opto-isolator and electrostatic discharge protection

High reliability and security:

  • hardware watchdog implemented in the Strato Pi board, fully independent from the Raspberry Pi, controlled via GPIO
  • real time clock (RTC) with replaceable back-up battery
  • optional embedded Microchip ATECC608A/B secure element chip
  • integrated boot loader for the Strato Pi micro-controller, allowing in-field firmware upgrades directly from the Raspberry Pi
  • optional pre-assembled SPBF10X Strato Pi Fan active cooling temperature controlled high performance fan


  • buzzer, controlled via GPIO
  • LEDs for power supply and serial line activity

 Raspberry Pi embedded:

  • 1 x Ethernet
  • 4 x USB
  • 1 x HDMI (RPi 3+) / 2x Micro HDMI (RPi 4)
  • 1 x microSD card slot
  • 1 x jack for audio and composite video
  • WiFi
  • Bluetooth/BLE


Power Supply

A high quality and stable power supply is extremely important to ensure reliable operation of your Raspberry Pi. Most USB power supplies are designed to recharge mobile devices, and not for continuous 24/7 loads in harsh industrial environments.

Strato Pi accepts a wide power supply range and is able to effectively handle substantial amounts of ripple, noise and supply voltage fluctuations. The power supply stage is a heavily protected and filtered circuit, using oversized electrolytic capacitors, diodes and inductors, and a high efficiency voltage regulator.

The step-down converter is based on advanced, high-output-current PWM converter integrated circuits with low resistance MOSFET, with approximately 95% efficiency and up to 3A continuous output current. It includes over current limiting, over voltage protection and thermal shutdown.

The power supply stage is also protected from reverse polarity with resettable fuses. Surge protection up to ±500V/2ohms 1.2/50μs ensures reliability in harsh environments.

Real Time Clock

The Raspberry Pi relies on Internet time servers to set its internal clock to the current date and time on start-up. If your applications always requires the correct time, even when not connected to the Internet, then you need to have a local real time clock/calendar to permanently keep track of time, even when the Raspberry Pi is off.

Strato Pi features a battery-backed real time clock/calendar, directly connected to the Raspberry board through the I2C bus interface. The automatic switch-over to a lithium battery guarantees the functionality of the RTC when its main power supply fails.

The real time clock is based on the MCP79410 general purpose RTCC chip from Microchip. It is connected to the Raspberry Pi’s I2C bus and, besides the standard clock function, it has several other advanced features.

A replaceable CR1025 battery is used as a backup power source when the main power is not available. If Strato Pi is always powered, the battery should last well over 10 years.

Serial Port

RS-232 and RS-485 serial ports are still widely used to connect devices in industrial automation and other applications. The Raspberry Pi lacks the circuitry to implement these protocols. While many USB adapters are available at reasonable price, they are usually not heavily protected and isolated.

The interface circuits of the RS-232 and RS-485 serial ports on Strato Pi are insulated from the main and battery power supply voltages, thus avoiding possible failures due to ground loops.

The insulation is obtained by means of a high efficiency isolated DC-DC converter and three hi-speed opto-couplers.

A micro-controller, using a proprietary algorithm, automatically manages the data direction of RS-485, taking into account the baud rate and the number of bits, without any special configuration. The Raspberry board can therefore communicate through its TX/RX lines without any other additional signal.

Hardware Watchdog

A hardware watchdog is an electronic circuit that can reset the processor if, for any reason, the software application appears to be stuck. An automatic hardware restart after a software hang can save your day, particularly on unattended applications that need to work continuously.

Taking advantage of the Strato Pi on-board microcontroller, we have implemented an hardware watchdog circuit that can be used, upon a software hang, to reset the Raspberry Pi.

The Strato Pi watchdog is completely independent from the Raspberry Pi’s internal CPU watchdog circuit and, being controlled by Raspberry Pi’s GPIO pins, it is extremely easy to control from your application and very effective in recovering from unexpected malfunction.


Power supply 9-28V⎓ (VDC)

Reverse polarity protection with 2.2A resettable fuse. Surge protection up to ±1000V/2ohms 1.2/50μs

Current consumption at VS+ 12V⎓

including Raspberry Pi 4, with Ethernet and RS-485 connected, no USB devices

low CPU load: 320mA

100% CPU load, before throttling: 590mA

100% CPU load, throttled: 500mA

Actual current consumption may vary based on working conditions

Current consumption at VS+ 24V⎓

including Raspberry Pi 4, with Ethernet and RS-485 connected, no USB devices

low CPU load: 190mA

100% CPU load, before throttling: 320mA

100% CPU load, throttled: 260mA

Actual current consumption may vary based on working conditions

Raspberry platform compatibility Pi 4 Model B

Pi 3 Model B+

Pi 3 Model B

Pi 2 Model B

(tested with Pi 4 Model B for regulatory compliance)

Serial communication ports RS-485 Half-Duplex with automatic data direction management

RS-232 Full-Duplex

Baud Rates on COMM ports 1200 to 115200
ESD-Protection Voltage on RS-232 TX/RX ±15kV human body model

±8kV contact discharge

ESD-Protection Voltage on RS-485 A/B ±15kV human body model

±8kV contact discharge

Surge protection on RS-485 A/B Surge protection up to ±500V/2ohms 1.2/50μs; 600W peak pulse power capability at 10/1000μs waveform
Fail safe feature on RS-485 Yes
Electromagnetic immunity compliance EN 61000-4-2 (ESD)

EN 61000-4-3 (Radiated RF Field)

EN 61000-4-4 (Burst/fast transient)

EN 61000-4-5 (Surge)

EN 61000-4-6 (Conducted)

EN 61000-4-8 (Power frequency magnetic field)

Real time clock Internal RTCC circuit with backup lithium battery. Only use CR1025 Lithium / Manganese Dioxide (Li/MnO2) batteries.

Expected battery life without main power supply: ~2 years

Housing standard 4M for DIN rail
Operating temperature -20…+50 °C

with SPBF10X: -20…+65 °C

Storage temperature -30…+70 °C
Relative humidity 5% to 90% noncondensing
Protection degree IP20
Weight 150 g



Go to Top