Industrial Digital I/O X2-Series Expansion Board
Strato Pi Max expansion board featuring 7 robust, IEC 61131-2 compliant, 0-36 V digital inputs with advanced diagnostics and 7 640 mA outputs (configurable as high‑side switches or push‑pull drivers), all safely isolated and powered via a dedicated 12–28 V supply.
€120.00 + tax
Need volume pricing or custom variations?
Description
The X2-Series X2BI10XD7 Industrial Digital I/O expansion board provides seven current-sinking 0…36 V, IEC 61131-2 compatible industrial digital inputs and seven 640 mA, 12…28 V outputs.
The output lines can be configured as high-side switches or push-pull drivers and have a dedicated on-board power supply input, independent of the Strato Pi Max power supply.
The inputs and outputs are galvanically isolated from the Strato Pi Max and feature diagnostic capabilities.
Features
- 12…28 Vdc dedicated I/O power supply
- 7 current-sinking 0…36 V, IEC 61131-2 compatible industrial digital inputs with diagnostics, based on MAX22190
- 7 640 mA, 12…28 V outputs that can be configured as high-side switches or push-pull drivers for high-speed switching, based on MAX14912/MAX14913
- inputs protected against electrostatic discharges and temporary overvoltages
- front panel LEDs show board power supply, digital outputs fault, digital inputs fault, I/O power supply undervoltage.
Specifications
| POWER SUPPLY | |
| I/O supply operating voltage | 12…28 V⎓ nom. (10.5…36 V⎓ ) |
| I/O input current | Max 20 mA + ∑ OUT1-OUT7 |
| IN1-IN7: DIGITAL inputs | |
| Input voltage range | +0…+36 V |
| Input current | 2.4 mA |
| Voltage thresholds | Compatible with EN 61131-2 Type I and III sensors VIH: 9.9 V VIL: 7.4 V |
| OUT1-OUT7: DIGITAL OUTPUTS | |
| Driver mode | high-side or push-pull |
| Maximum current per output | 640 mA |
| HS or PP high-side on-resistance | 110 mOhm (Max 230 mOhm) |
| PP low-side on-resistance | 1 Ohm (Max 2.5 Ohm) |
| EMI IMMUNITY STANDARDS | |
| Electromagnetic immunity compliance | EN 61000-4-2 (ESD) EN 61000-4-3 (Radiated RF Field) EN 61000-4-4 (Burst/fast transient) EN 61000-4-5 (Surge) EN 61000-4-6 (Conducted) EN 61000-4-8 (Power frequency magnetic field) |
| ENVIRONMENTAL | |
| Operating temperature | -20…+60 °C |
| Storage temperature | -30…+80 °C |
| Altitude | Up to 2000 m |
| Humidity | 5% to 95% RH noncondensing |
| Protection degree | IP20 |
| Vibration IEC 60068-2-6 (Test Fc, Operating) | 0.7 g @ 5…100 Hz |
| MECHANICAL | |
| 3.81 mm pitch terminal block characteristics | Maximum conductor cross section: 1.3 mm2 (16AWG), or 0.5 mm2 when using ferrules (highly recommended) Recommended stripping length: 6 mm Screw thread: M2 Maximum screws tightening torque: 0.3 Nm |
| Dimensions | width: 84.3 mm height: 41.1 mm depth: 14.5 mm |
| Weight | 35 g (including terminal blocks and screws) |