Need help? Contact us!

Worldwide shipping

Long-term
support

Custom
solutions

Worldwide shipping

Long-term
support

Custom
solutions

X2-Series CAN and Dual RS-485 Expansion Board

Expansion board featuring one galvanically isolated CAN V2.0B interface and two galvanically isolated RS-485 serial ports.

129.00 + tax

SKU: X2BS10XC44 Category: Tag:

Need volume pricing or custom variations?

Description

The X2-Series X2BS10XC44 CAN and dual RS-485 expansion board provides one galvanically isolated CAN V2.0B interface and two galvanically isolated RS-485 serial ports. The CAN driver is connected to the Compute Module’s SPI interface. The RS-485 ports are interfaced to the Compute module via an integrated FTDI FT2232HQ Hi-speed USB 2.0 Slave to Dual Channel UART / Serial Converter.

Features

  • one  CAN V2.0B interface, support speeds up to 1 Mb/s, with opto-isolator and electrostatic discharge protection
  • two standard RS-485 interfaces, with opto-isolator and electrostatic discharge protection, up to 115.200 bps
  • separate galvanic isolation of the CAN and RS-485 interfaces
  • Configurable local TX/RX echo on the RS-485 interfaces
  • front panel LEDs show board power supply, CAN RX and TX activity, RS-485 RX and TX activity for each interface.

Specifications

COMMUNICATION PORTS
Serial communication ports RS-485 Half-Duplex with automatic data direction management

Controller Area Network CAN 2.0B

Baud Rates on RS-485 ports 1200 to 115200
CAN interface speed (as tested) 500 kbps
ESD protection on RS-485 A/B ±30 kV human body model

±16 kV IEC 61000-4-2 contact discharge

±4 kV IEC 61000-4-4 fast transients

ESD protection on CANH, CANL ±14 kV IEC 61000-4-2

±8 kV IEC 801 human body model

Transient Voltage protection on CANH, CANL -150 V to +100 V (waveforms of the applied transients in accordance with ISO-7637, Part 1, test pulses 1, 2, 3a and 3b)
EMI IMMUNITY STANDARDS
Electromagnetic immunity compliance EN 61000-4-2 (ESD)

EN 61000-4-3 (Radiated RF Field)

EN 61000-4-4 (Burst/fast transient)

EN 61000-4-5 (Surge)

EN 61000-4-6 (Conducted)

EN 61000-4-8 (Power frequency magnetic field)

ENVIRONMENTAL
Operating temperature -20…+60 °C
Storage temperature -30…+80 °C
Altitude Up to 2000 m
Humidity 5% to 95% RH noncondensing
Protection degree IP20
MECHANICAL
3.81 mm pitch terminal block characteristics Maximum conductor cross section: 1.3 mm2 (16AWG), or 0.5 mm2 when using ferrules (highly recommended)

Recommended stripping length: 6 mm

Screw thread: M2

Maximum screws tightening torque: 0.3 Nm

Dimensions width: 84.3 mm

height: 41.1 mm

depth: 15.3 mm

Weight 30 g (including terminal block and screws)

Documentation

Title

Go to Top