- Strato Pi Max expansion board featuring one galvanically isolated CAN V2.0B interface and two galvanically isolated RS‑485 ports with ESD protection.
- Prototyping board for Strato Pi Max to design and test custom circuits. It exposes all standard X2‑Series bus lines via a two‑sided grid of solderable thru‑holes and has room for a pluggable terminal block. Onboard 3.3 V regulator, DS28E05 EEPROM and front‑facing LED.
- DIN rail power supplies with 90~264 Vac universal input, 12/24 Vdc output voltage.
- Encapsulated switch mode power supply (SMPS) 85~305 Vac input, 12 Vdc/416 mA/5 W output.
- Raspberry Pi multi-sensor module featuring temperature, humidity, air quality, light intensity, motion sensors and a microphone. Wi-Fi, Bluetooth, and RS-485 interface.
- RP2040 multi-sensor module featuring temperature, humidity, air quality, light intensity, motion sensors, a microphone, and RS-485 interface. Easy C/C++ or MicroPython development.
- USB to RS-232 adapter cable, 2m, with DB9 connector and thumb screws locking (UT232R-200-BLK).
- USB to RS-485 adapter cable, 1.8m, wire ended (USB-RS485-WE-1800-BT).
- USB to TTL-level UART adapter cable, 1m, single-pole female headers (TTL-232R-RPi). Suitable for Exo Sense Py programming and debugging.
- Strato Pi Max expansion board featuring four ±20 V voltage and four 0–20 mA current channels, and two Pt100/Pt1000 temperature inputs – all galvanically isolated. Protected 5 V auxiliary power output and two digital I/O lines for 1-Wire, Wiegand, or I2C devices.
- Strato Pi Max expansion board providing four individually configurable outputs set as either 0–10 V voltage or 0–20 mA current drivers. Protected 5 V auxiliary power output and two digital I/O lines for 1-Wire, Wiegand, or I2C devices.
Strato Pi Max expansion board featuring 7 robust, IEC 61131-2 compliant, 0-36 V digital inputs with advanced diagnostics and 7 640 mA outputs (configurable as high‑side switches or push‑pull drivers), all safely isolated and powered via a dedicated 12–28 V supply.
- Raspberry Pi industrial board with digital and analog inputs, power relays, open collector outputs and I/O lines for I2C, 1-Wire, Wiegand and other digital protocols, plus wide-range power supply and RTC. CE/FCC/IC compliant.
- Industrial Raspberry Pi PLC with a wide range of digital and analog inputs and outputs, NO/NC relays, UPS, RS-232 and RS-485 interfaces, CAN, dual SD card, RTC, watchdog, secure element. CE/FCC/IC compliant.
- Raspberry Pi touch panel kit with embedded digital and analog inputs, power relays, open collector outputs and I/O lines for I2C, 1-Wire, Wiegand and other digital protocols.
Industrial Raspberry Pi 4 or 5 I/O module (PLC), DIN rail mounted, 9-28 V DC power supply, Ethernet, Wi-Fi, BLE, 4 USB, 1 µSD card slot, 2 analog voltage inputs 0-30 V, 2 analog current inputs 0-20 mA, 7 configurable GPIO pins, 4 relays, 1-Wire and Wiegand support, RTC, watchdog and secure element. CE/FCC/IC compliant.
- Industrial Raspberry Pi I/O module powered by the RP2040 microcontroller, featuring 16 galvanically isolated, IEC 61131-2 compliant channels with surge protection. Easy C/C++ or MicroPython development. CE/FCC/IC compliant.
- Strato Pi Max expansion board providing providing LTE connectivity and GNSS positioning.
- Compact USB programming tool for flashing Raspberry Pi Compute Modules (CM1, CM3, CM3+ and CM4S). It features a USB-A interface, onboard power management and EEPROM programming support.
- Strato Pi Max expansion board providing four serial ports individually configurable as full-duplex RS-422 or half-duplex RS-485. Integrated FTDI FT4232H hi-speed USB 2.0 converter.
Worldwide shipping
Long-term
support
Custom
solutions
Worldwide shipping
Long-term
support
Custom
solutions
